Avaya 8800 Series Installation Manual page 84

SFP+ specifications
Maximum average launch power of OFF
transmitter
Minimum extinction ratio
RIN OMA (maximum)
12
Maximum optical return loss tolerance
Maximum transmitter reflectance
Receiver characteristics
Line rate (nominal)
Average receive power for BER 10
Maximum average receive power for
damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receiver electrical 3 dB upper cutoff
frequency
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down condition
10GBASE-ER/EW SFP+ specifications
The following table lists the transmitter and receiver specifications for the 10GBASE-ER/EW
SFP+. The reach for this SFP+ is up to 40 km at a wavelength of 1550 nm. The part number
of this SFP+ is AA1403013-E6.
For more information about the 10GBASE-ER/EW SFP+, including test and measurement
information and more specifications, see the IEEE 802.3ae standard.
Table 28: IEEE 802.3ae 10GBASE-ER/EW SFP+ specifications
Line rate (nominal)
Center wavelength range
Distance
Link optical power budget
Transmitter and dispersion power penalty
84 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
c
Parameter
Comments? infodev@avaya.com
– 30 dBm
3.5 dB
– 128 dB/Hz
-– 12 dB
– 12 dB
10GBASE-LR 10.3125 Gb/s ± 100 ppm (10
GbE)
– 14.4 dBm to 0.5 dBm
-12
1.5 dBm
– 12.6 dBm
– 12 dB
– 10.3 dBm
12.3 GHz
10GBASE-ER 10.3125 Gb/s ±100 ppm (10
GbE)
1530 to 1565 nm; nominal 1550 nm
Up to 40 km
15 dB
3.0 dB at 40 km
Specifications
Specifications
August 2013