Installing An Sfp - Avaya 8800 Series Installation Manual

SFP+ order number
AA1403019-E6
AA1403020-E6
AA1403153-E6
AA1403154-E6
AA1403155-E6
AA1403156-E6
AA1403157-E6
AA1403158-E6
AA1403159-E6
AA1403160-E6

Installing an SFP+

Install an SFP+ to provide a 10 Gb Ethernet interface between the device and other network
devices.
Before you begin
Important:
Do not install an SFP+ transceiver in an SFP slot. The two transceivers look the same but
function differently. Ensure the slot is an SFP+ slot.
• Verify that the SFP+ is the correct model for your network configuration.
• Before you install the optical connector, ensure it is clean.
Warning:
Risk of eye injury by laser
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber optic cables connect to a
light source.
Electrostatic alert:
Risk of equipment damage
To prevent damage from electrostatic discharge, always wear an antistatic wrist strap
connected to an ESD jack.
Installation — SFP, SFP+, XFP, and OADM Hardware Components
10GBASE-CX
4-pair direct attach twinaxial copper cable to connect 10 Gb
ports. The length is 3 m.
10GBASE-CX
4-pair direct attach twinaxial copper cable to connect 10 Gb
ports. The length is 5 m.
10GBASE-ER CWDM SFP+
1470 to 1610 nm with a range up to 40 km
Description
Installing an SFP+
August 2013 43