Avaya 8800 Series Installation Manual page 34

Small form factor pluggable transceivers
5. Use the following job aids to determine the appropriate SFP for your application.
Job aid
The following table describes the reach provided by various SFPs. This table is informational
only—not all Avaya Ethernet switching and routing products support all the SFPs listed here.
SFP model
1000BASE-T
1000BASE-SX
1000BASE-LX
1000BASE-XD
1000BASE-ZX
1000BASE-BX
1000BASE-EX
Job aid
SFPs are hot-swappable input and output enhancement components designed for use with
Avaya products to allow gigabit Ethernet ports to link with other gigabit Ethernet ports over
various media types.
The SFPs described in this section do not have Digital Diagnostic Interface capability, and are
RoHS -E5 compliant.
The system also supports CWDM SFPS. CWDM technology consolidates multiple optical
channels on a common optical fiber. CWDM uses multiple wavelengths to expand available
bandwidth.
CWDM SFPs support high speed data communications for Metropolitan Area Networks (MAN).
The system uses a grid of eight CWDM optical wavelengths in both ring and point-to-point
configurations. All components are color-coded by wavelength.
34 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Note:
For non-Avaya SFPs, DDM is not available.
Lowest-cost gigabit Ethernet solution. Up to 100 m reach over
Category 5 (CAT5) unshielded twisted pair (UTP).
Well-suited for campus local area networks (LAN) and intrabuilding
links. Up to 275 or 550 m reach (fiber-dependent) over a fiber pair.
Up to 10 km reach over a single mode fiber (SMF) pair. Up to 550 m
reach over a multimode fiber (MMF) pair.
Up to 40 km reach over a single mode fiber pair.
Up to 70 km reach over a single mode fiber pair.
Up to 10 km reach. Bidirectional over one single mode fiber.
Up to 120 km reach over a single mode fiber pair.
Comments? infodev@avaya.com
Common application
August 2013