Chapter 11: Xfp Specifications; Xfp Labels - Avaya 8800 Series Installation Manual
Ethernet routing switch hardware components
Hide thumbs
Also See for 8800 Series:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Chapter 11: XFP specifications
This section provides technical specifications for the supported 10 gigabit SFP (XFP) models. Use these
specifications to aid in network design.
The specifications in this section are a subset of the IEEE 802.3ae and 802.3aq specifications. For more
information, see these standards documents. All Avaya XFPs meet or exceed these standards.
Important:
Avaya recommends that you only use Avaya-qualified XFPs. If you do choose to use other vendor
XFPs, be aware that Avaya does not support the use of other XFPs.
XFP labels
As shown in the following figure, the Avaya label on a typical XFP contains an Avaya serial
number, a bar code, a manufacturer code, an interface type, and a part number.
Note:
The operating wavelength shown on the label represents an operational range of values.
This number may vary from the more exact output of the show sys pluggable-
optical-modules info command.
Installation — SFP, SFP+, XFP, and OADM Hardware Components
August 2013
89
Advertisement
Table of Contents
