10Gbase-Lrm Xfp Specifications - Avaya 8800 Series Installation Manual
Ethernet routing switch hardware components
Hide thumbs
Also See for 8800 Series:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
XFP specifications
Maximum optical return loss tolerance – 12 dB
Receiver characteristics
Average receive power for BER 10
Maximum average receive power for
damage
Maximum receiver sensitivity in OMA
Maximum receiver reflectance
Stressed receiver sensitivity in OMA
Receiver electrical 3 dB upper cutoff
frequency
The stressed sensitivity values are for system level BER measurements, which include the
effects of clock and data recovery (CDR) circuits. Avaya recommends that you allocate at least
0.4 dB additional margin if you make component level measurements without the effect of CDR
circuits.
10GBASE-LRM XFP specifications
The 10GBASE-LRM XFP provides 10 GbE service at a wavelength of 1310 nm. This XFP can
attain a reach of up to 220 m on 62.5 μm multimode fiber. This XFP provides built-in electronic
dispersion compensation.
The following table lists the transmitter and receiver specifications for the 10GBASE-LRM XFP.
These parameters meet the IEEE 802.3aq-2006 standard. The part number of this XFP is
AA1403007-E6.
In this table, the OMA, average launch power, and peak power specifications apply at TP2,
after patch cord loss is accounted for.
Table 35: IEEE 802.3aq 10GBASE-LRM XFP specifications
Data rate
Line rate (64B/66B code)
Center wavelength range
Distance
92
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
-12
Parameter
Comments? infodev@avaya.com
Specifications
– 9.9 to – 1.0 dBm
0 dBm
– 11.1 dBm
– 12 dB
– 7.5 dBm
12.3 gigaHertz (GHz)
Specifications
10.0 Gb/s
10.3125 Gb/s ± 100 ppm
1260 to 1355 nm; 1310 nm nominal
Up to 220 m, for more information, see
36: 10GBASE-LRM channel insertion loss
and range
on page 93
Table
August 2013
Advertisement
Table of Contents
