1000Base-Ex Ddi Sfp Specifications - Avaya 8800 Series Installation Manual

SFP specifications
while the mating model transmits at 1490 nm and receives at 1310 nm. You can only connect
a mating pair.
You can use 1000BASE-BX SFPs to double the number of your fiber links. For example, if you
install 20 fiber pairs with 20 conventional ports connected, you can use 1000BASE-BX SFPs
to expand to 40 ports, using the same fiber.
The long wavelength optical transceivers used in these models provide variable distance
ranges using single mode fiber optic cabling.
The following table describes standards, connectors, cabling, and distances for the
1000BASE-BX SFP.
Table 20: IEEE 802.3ah 1000BASE-BX10 SFP specifications
Connectors
Data rate
Line rate (8B/10B code)
Distance
Wavelength
Link optical power budget
Maximum transmitter and dispersion power
penalty
Transmitter characteristics
Maximum launch power
Minimum launch power
Receiver characteristics
Maximum receiver sensitivity
Maximum input power (maximum average
receive power)

1000BASE-EX DDI SFP specifications

The following table describes the 1000BASE-EX DDI SFP. This SFP operates at 1550 nm and
has a reach of up to 120 km. The part number of this SFP is AA1419071-E6.
Caution:
Risk of equipment damage
74 Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter
Comments? infodev@avaya.com
Specifications
Single-fiber LC
1.0 Gb/s
1.25 Gb/s
Up to 10 km
1310 nm and 1490 nm
11.0 dB
3.3 dB
– 3.0 dBm
– 9.0 dBm
– 19.5 dBm
– 3.0 dBm
August 2013