Avaya 8800 Series Installation Manual page 91

For more information about the 10GBASE-SR XFP, including test and measurement
information, see the IEEE 802.3ae standard.
The 10GBASE-SR XFP is supported by the Ethernet Routing Switch 5530 (not by the 5510 or
5520), and by the Ethernet Routing Switch 5600 Series.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation is present
between the transmit and receive ports.
Table 34: IEEE 802.3ae 10GBASE-SR XFP specifications
Data rate
Line rate (64B/66B code)
Mean Time Between Failures (MTBF) 675 000 hours
Center wavelength range
Distance
Link optical power budget
Maximum transmitter and dispersion
penalty
Transmitter characteristics
Root-mean-square spectral width
Launch power
Maximum average launch power of
OFF transmitter
Minimum extinction ratio
Maximum relative intensity noise
OMA
12
Installation — SFP, SFP+, XFP, and OADM Hardware Components
Parameter Specifications
10.0 Gb/s
10.3125 gigabits per second (Gb/s) ± 100 parts per
million (ppm)
840 to 860 nanometers (nm), nominal 850 nm
Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
7.3 dB
3.9 dB at 300 m
0.05 to 0.40 nm
– 7.3 to – 1.0 deciBels referenced to 1 milliwatt
(dBm)
– 30 dBm
3.0 dB
– 128 dB per Hertz (dB/Hz)
10GBASE-SR XFP specifications
August 2013 91