Safety And Regulatory Information; Considerations Before Installing - Extreme Networks ISW Series Installation Manual

Safety and Regulatory Information

Considerations Before Installing
General Safety Precautions
Maintenance Safety
Fiber Optic Ports and Optical Safety
Cable Routing for LAN Systems
Install Power Supply Units and Connect Power
Select Power Supply Cords
Battery Notice
Federal Communications Commission (FCC) Notice
Warning
Read the following safety information thoroughly before installing Extreme
Networks products. Failure to follow this safety information can lead to
personal injury or damage to the equipment.
Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS
3260) should install, replace, or perform service to Extreme Networks switches and their
components. Qualified personnel have read all related installation manuals, have the
technical training and experience necessary to be aware of the hazards to which they
are exposed in performing a task, and are aware of measures to minimize the danger to
themselves or other persons.
If you are located in the United States, install the system in accordance with the U.S.
National Electrical Code (NEC).

Considerations Before Installing

Consider the following items before you install equipment.
•
For equipment designed to operate in a typical Telco environment that is
environmentally controlled, choose a site that has the following characteristics:
Temperature-controlled and humidity-controlled, such that the maximum
◦
ambient room temperature shall not exceed 50°C (122ºF).
Clean and free from airborne materials that can conduct electricity.
◦
Well ventilated and away from sources of heat including direct sunlight.
◦
on page 71
on page 72
on page 73
on page 74
on page 76
on page 76
ISW Series Managed Industrial Ethernet Switch Hardware Installation Guide
on page 73
on page 75
on page 77
71