General Setup; Television Display; Angle Function; Osd Long - Clatronic DVD 582 Instructions For Use Manual

DVD 582 - GB 30.09.2003 12:31 Uhr

General Setup

Press for SETUP button on the remote control - the gene-
ral setup page appears on the screen (= GENERAL SE-
TUP PAGE). With the up/down CURSOR you can now
select the television display, angle symbol, screen menu
language and screensaver (illustration 2).

Television Display

• NORMAL/PS – 4x3 Pan Scan
When this setting is selected the
picture fills the entire screen. Ho-
wever, part of the picture (particu-
larly on the left-hand and right-
hand sides) cannot be seen.
• NORMAL/LB – 4x3 "Letterbox"
Select this setting if you would li-
ke to watch the film in the original
format. You will now see the enti-
re frame of the film, but this will
take up less space on the screen.
• WIDE – 16x9 Wide Screen
Select this setting if your DVD
player is connected to a "wide
screen" television set.
Angle Symbol
You can watch the DVD picture from various angles when
this function is activated [however this is only possible if
the DVD also supports this function].
OSD LANG
The "on-screen display" can be set to various languages
Seite 35

Screensaver

When the DVD player is not active (after approximately
four minutes of inactivity) the screensaver may be activa-
ted to lengthen the service life of the TV monitor.
AUDIO Setup

Loudspeaker Setup

Press the UP/DOWN CURSOR in order to select items in
the loudspeaker settings.

Downmixing

STEREO or LT/RT: If you have only two loudspeakers
connected you should choose one of these options.

SPDIF OUTPUT

Press the left button to return to the audio setup page
and then use the up/down cursor to select the SPDIF set-
tings.
35