Initial Settings; General Setup - Clatronic DVD 613 User Manual

Initial Settings

• Once the initial programming is entered it is retained
in memory until changed, the player can always be
operated under the same conditions.
• The settings will be retained in the memory until the
settings are changed even after setting the player to
the standby mode.
Common procedure for initial settings
1. Press SETUPbutton.
2. Use the navigation buttons to select preferred item,
then press ENTER button, each screen for setting
the value is displayed.
3. Press SELECT button to close setup menu in any
mode.
4. Use left navigation button to switch to another main
setup items

1. GENERAL SETUP

1.1 TV DISPLAY - it is used to select the TV output
mode.
Options: Normal /PS: Pan & scan mode
Normal/ L/B: Letter box mode
Wide : 16:9 wide screen mode
1.2 ANGLE MARK - it is used to select whether or not
The multi- angle icon is display on the screen when
a Multi-angle DVD disc is playing.
Options: On: Icon will be displayed
Off: Icon will be turned off
1.3 OSD. LANG - it is used to select different On
Screen Display language for different user.
1.4 SCREEN SAVER - when the player is not in used
for 2 minutes, a running DVD logo will move across
the TV screen to protect the TV CRT.
Options: On: Screen saver is enabled
Off: Screen saver is disabled
5....-05-DVD 613 GB 50
50
15.03.2004, 15:47:51 Uhr