Programming Of Dvds/ Vcds/ Cds; Repeat A-B; Goto Function - Clatronic DVD 582 Instructions For Use Manual

DVD 582 - GB 08.10.2003 12:54 Uhr
In the case of VCDs or CDs, by repeatedly pressing the
REPEAT button you can repeat one track or all tracks.
TRACK ,
Programming
DVDs
If you would like to play back a specific TITLE/SECTION,
switch the device to the STOP mode and press the PRO-
GRAM button on the remote control and then the keys of
the numbers that you see on your television screen, such
as:
PROGRAM: TT(01)/CH(01)
1. TT 1 CH 1
2. TT _ CH _
3. TT _ CH _
4. TT _ CH _
5. TT _ CH _
EXIT
To select "START" you can use the CURSOR buttons and
then press ENTER to start playback of the program.
VCDs/CDs
If the device is in the STOP mode and you would like to
play back tracks 5, 6 and 3, for example, press the PRO-
GRAM button on the remote control and then the 5, 6 and
3 number keys which you then see the on the television
screen:
PROGRAM: TRACK (01-16)
1 5
2 3
3 6_
4 ______
5 ______
EXIT
To select "START" you can use the CURSOR buttons and
then press ENTER to start playback of the program.
It is not possible to program MP3 tracks.
Repeat A-B Function (enables continuous repetition
of specific sections of the disc)
• Press the A-B button on the remote control when the
position has been reached from which playback is
supposed to start. REPEAT A- appears in the display.
Press the A-B button again when that point has been
reached where playback should finish. REPEAT A-B
SET appears in the display. The A-B segment now re-
peats the section continuously until the A-B button is
pressed a third time.
32
Seite 32
ALL
,
6. TT _ CH _
7. TT _ CH _
8. TT _ CH _
9. TT _ CH _
10. TT _ CH _
START NEXT I
6 ______
7 ______
8 ______
9 ______
10 ______
START NEXT I
A
,

GOTO Function

It is possible to put in a time, title or chapter number directly
if you would like to perform a rapid search of the disc. The
player will then begin playback from this position.
In the case of DVDs the following appears in the dis-
play when the GOTO button is pressed:-
This menu provides you with the following information:
The first line shows you the current title number and the
total number of titles. The second line is the current chap-
ter number and the total number of chapters. The third li-
ne shows the current status of the AUDIO function, while
the bottom line shows the current status of the subtitle
function.
Moving to a title or chapter.
For example, chapter 2 in title 6:
TITLE 06/06
Press GOTO on the remote control and the screen shows
the above menu. Use the cursor buttons to select the title
line. Then press the ENTER button in order to select the
TITLE. Press 06 to select title 6. If you would like to select
the chapter, use the cursor buttons to select the chapter
line and repeat the steps above.
With the cursor buttons it is also possible to call up the to-
tal title time and the total chapter time. If you would like to
select a specific time, press the ENTER button and then
enter the desired starting time using the number keys.
By pressing the GOTO button again you can return to
normal screen playback.
For VCDs (PBC OFF)
In the case of VCDs a similar menu appears when the
GOTO button is pressed as for DVDs. Only the menu
items are different. Using the cursor buttons you can sel-
ect the tracks, disc time, track time, status of the REPEAT
function or the status of the display. By pressing the ENT-
ER button you can select the menu item that you would
like to change. In the case of the times you can use the
number keys to pre-select a time. The VCD is then played
back from this point. By means of the other menu items
you can use the cursor buttons to make various
adjustments.
Your selection is confirmed using the ENTER button.
For CDs: When the GOTO button is pressed on the
control of the following appears in the display:
DISC GO TO:
AB
,
CHAPTER 02/08
__:__:__