Lpcm Out; Dolby Digital Setup; Video Setup; Components - Clatronic DVD 582 Instructions For Use Manual

DVD 582 - GB 30.09.2003 12:31 Uhr
• OFF: The output display is pre-set to the "analogue"
format. You should select this setting if you play back
the CD on your DVD player via the right-hand and left-
hand SPDIF OUTPUT sockets. When this function is
selected there is no display from the coaxial port.
• SPDIF/RAW: Select this option if the DVD player is
connected via the coaxial DIGITAL OUT port to an
amplifier. The amplifier that is to be connected must
have Dolby Digital decoding.
• SPDIF/PCM: Select this option if the DVD player is
connected to a 2-channel Digital Modus or a stereo
amplifier. During playback of a Dolby Digital or MPEG
CD the output of the coaxial port is in PCM 2-channel
format. These programmes have an uncompressed di-
gital stereo soundtrack for improved sound quality. Du-
ring playback it is possible to hear discreet stereo so-
und coming from the left and right loudspeakers at the
front.

LPCM OUT

LPCM 48K:
In the linear PCM setting "48K" means that the maximum
"Digital Output Sampling Rate" is 48 KHz. If the encoded
sampling rate of the title track is 96 KHz the output is for-
cibly converted to 48 KHz.
LPCM 96K:
If "96K" has been selected the maximum output sampling
rate is 96K and no enforced conversion takes place.

Dolby Digital Setup

DUAL MONO:
There are four modes available: STEREO, L-MONO, R-
MONO and MIX-MONO.
36
Seite 36
Description of the Audio Playback
Left
MODUS
Loudspeaker
STEREO Stereo-l
L-MONO l-Mono
R-MONO r-Mono
l-Mono +
MIX-MONO
r-Mono
Dynamic:
This function makes it possible to change the dynamic
sound output. The playback of loud noises (shots, explo-
sions) is toned down, thus making it possible for you to
watch your favourite film without disturbing others.

Video Setup

Components

In this display you have a choice of the following compo-
nent signals OFF, YUV or RGB.
• Off:
The video frequency output has video and S-video.
• YUV:
The video frequency output has video, S-video and
YUV. In this function the TV mode is active. You may
select INTERLACE or P-SCAN.
• RGB:
The video frequency output has video, S-video and
RGB.
Please Note:
If you pre-select the P-SCAN function when using an IN-
TERLACE (PAL) television the INTERLACE television will
not transmit pictures. The pictures will disappear. You can
press the P/l button again in order to return to the INTER-
LACE setting.
Right
Loudspeaker
Stereo-r
l-Mono
r-Mono
l-Mono +
r-Mono