Playback Of Jpeg And Kodak Picture Cd; Basic Setup - Clatronic DVD 582 Instructions For Use Manual

DVD 582 - GB 30.09.2003 12:31 Uhr
4. Press the DISPLAY button and you will see the possi-
ble changes in Menu 2. In the first line of the menu the
number 128 changes to Directory. In the second line
the current playback mode is added. Press the
DISPLAY button again in order to return to Menu 2.
5. While a track is being played you can use the UP/DO-
WN button to select any desired track.
6. It is also possible to use the fast forward and fast
rewind buttons.
In MP3 mode it is not possible to program the order of
tracks. The PROGRAM button only allows you to switch
between the directory and file views.
Playing back JPEG and Kodak Picture CDs
Kodak Picture CDs
• Press the STANDBY button followed by the
OPEN/CLOSE button in order to open the CD
compartment. Insert the Kodak Picture CD with the la-
bel facing upwards. Press the OPEN/CLOSE button
again to close the CD compartment.
• The device reads the contents of the CD and automa-
tically begins to play back a slideshow.
• By pressing the STOP button you can change to a mi-
niature view of the pictures.
• In this menu it is possible to use the cursor buttons.
• In order to confirm your selection please press the
ENTER button.
JPEG CDs
• Press the STANDBY button followed by the
OPEN/CLOSE button in order to open the CD
compartment. Insert the JPEG CD with the label
facing upwards. Press the OPEN/CLOSE button again
to close the CD compartment.
• The device reads the contents of the CD and automa-
tically starts a menu in which you can see the
contents of the CD.
• In this menu you can use the cursor keys to select any
desired directory or picture and confirm with the ENT-
ER button.
• If you select a picture, a slideshow is started from this
picture. Once the end of the slideshow has been rea-
ched, the device automatically returns to the start me-
nu.
• If you press the STOP button during the slideshow you
will see a miniature view of the pictures as with the
Kodak Picture CD.

Basic Setup

When the basic setup has been entered the player can
always be operated under the same conditions. The set-
tings remain in the memory even when the power is swit-
ched off.
• The basic setup has to be entered in the setup mode,
although the function can be set in any mode.
• Using the setup menu you can adjust the playback
mode or set various outputs etc.
34
Seite 34
• If in the STOP or playback mode the SETUP button is
pressed on the remote control, a display appears on
the screen as shown in illustration 1.Press the SETUP
button again in order to leave the setup menu and re-
turn to the television display.
ILLUSTRATION 1
• Use the up/down cursor to select the desired menu
item and then press the ENTER button. You should
now see a display as shown in illustration 2. On each
page of the menu the menu items are listed from left
to right. Use the CURSOR button on the remote con-
trol to move through the options or to set them on the
right-hand side. Then use the up/down CURSOR in
the list of options and press the ENTER button to ma-
ke your selection. Use the left CURSOR button to re-
turn to the left-hand side of the menu and carry out
further changes.
ILLUSTRATION 2
• Use the left/right CURSOR buttons to select the main
settings page, the audio settings page, the video set-
tings page, the preferences page or the page contai-
ning the password settings. If you see illustration 2 in
the menu, you first have to press the left-hand cursor
button to return to the menu as shown in illustration 1.
Then use the right/left CURSOR to select the page of
audio settings etc.
Please Note:
If you select the function in this menu, remarks on the
function are shown at bottom left. If you select the prefe-
rences page, the DVD must be in the stop mode.