Digital Audio Connections - Clatronic DVD 582 Instructions For Use Manual

Table of Contents

Advertisement

Available languages

Available languages

DVD 582 - GB
08.10.2003 12:54 Uhr

Digital Audio Connections

Connecting to a Decoder with
Dolby Digital Processor or MPEG Processor A
In the case of DVDs recorded in Dolby Digital or MPEG
Audio, the Dolby Digital bitstream or MPEG Audio bitstre-
am is output by the COAX Digital Audio output
connection of the device. If the player is connected to a
Dolby Digital Decoder or MPEG Audio Decoder, you can
enjoy cinema audio quality in your own home (a coax au-
dio cable (not supplied) is required if you want to use an
optional Dolby Digital Decoder or MPEG Audio Decoder.)
Information on the Audio Output
of the Digital Coax Connector Output of the Device
Sound Recording
Disc
Format
Dolby Digital
Linear PCM (48/96
DVD
kHz 16/20/24 Bit)
MPEG1 MPEG2
Video CD
MPEG1
CD
Linear PMC
*1 The type of audio output from the connection can be
selected in the basic setup.
*2 Sound with 96kHz sampling is converted to 48 kHz
sampling when it is output via the digital coax output
connection of the device.
For your Information:
Dolby Digital is a Digital sound compression technique
developed by the Dolby Laboratories Licensing Corpo-
ration.
This technology supports 5.1-channel surround sound
as well as stereo (2-channel) sound, whereby a high
number of sound data can be efficiently recorded onto
one CD.
Linear PCM is a signal recording format used for CDs.
While CDs are recorded at 44.1 kHz / 16 bit, DVDs
are recorded at between 48 kHz /16 bit and 96 kHz /
24 bit.
Precautions to be taken with the
Digital Coax Audio Output Connector:
Do not connect a digital output to an analogue ampli-
fier input otherwise any attempt to play back DVDs
could produce such a high sound level that your ears
or loudspeakers could be damaged.
Seite 27
Coax Digital Audio Output
of the Connection
Dolby Digital bitstream (2-5,1ch)
or PCM (2ch)(48kHz/16bit)
Linear PCM(2ch)
only 48kHz sampling/16 Bit)*2
or no output*1
MPEG2 audio bitstream or
PCM(2ch)(16 Bit)*1
PCM (44.1 kHz sampling)
Linear PCM (44.1 kHz sampling)
DVD/CD
Player
Coaxial audio
cable (optional)
To the coaxial digital
Decoder or
audio connection
amplifier with Dolby
Digital (AC3)/MPEG
(optional)
Television set
(optional)
S-VIDEO, 21-pin or
Y, Pb/Cb, Pr/Cr connection
27

Advertisement

Table of Contents
loading

Table of Contents