General Connection - Clatronic DVD 582 Instructions For Use Manual

DVD 582 - GB 30.09.2003 12:31 Uhr

General Connection

• Turn all POWER (power on / off) switches on the play-
er and the other devices to be connected to OFF befo-
re making the connection.
• Read thoroughly the instructions of the devices that
you want to connect beforehand.
Connecting to Stereo Television Sets [A]
1 Television set (optional)
2 DVD player
3 Front audio output (red, white)
4 S-video cable (option 1)
5 To audio input connection (red, white)
6 To 21-pin scart connection input (TV)
7 To S-video input connection (option video 1)
8 AC power lead
9 Mains output (AC220-240, 50Hz)
10 21-pin scart connection to DVD player (option video 2)
11 To AV input connection (option video 3)
12 AV lead (optional) (option video 3)
13 Y, Pb/Cb, Pr/Cr output (video option 4)
14 To Y, Pb/Cb, Pr/Cr input of the television set
(video option 4)
15 POWER (POWER ON / OFF) SWITCH
Note:
There are four possible ways to connect this DVD player:
Option 1:
Option 2:
Option 3:
Option 4:
(This function can only be used if your television set is
equipped with a P-SCAN or video component input). Only
one of these possible connections should be used in or-
der to avoid picture interference.
S-Video Output Connection
The S (separate) video output connection separates the
colour (C) and brightness signals (Y) before they are pas-
sed to the television set in order to produce a sharper pic-
ture.
Please use an S-video cable if you connect the player to
a television set with an S-video output connection in
order to produce the sharpest picture possible.
26
Seite 26
S-video.
SCART to SCART.
RCA-video output.
Y, Pb/Cb, Pr/Cr
Connecting to Single-Channel Television Sets [B]
1 Television set (to be connected)
2 DVD /CD player
3 21-pin scart connection
4 To television set input connection
5 To DVD output connection
Connecting to Audio Equipment [C]
1 Audio device (optional)
2 Television set (optional)
3 DVD / CD player
4 Audio (optional)
5 To audio input connections (red, white)
6 21-pin scart connection (see above [A])
Important:
• When DVDs are played back it is possible that the vo-
lume of the television set is lower than during televisi-
on programmes, etc. In this case simply adjust the vo-
lume to the desired level.
• If the DVD / CD player is connected to a television set
through a video recorder it is possible that with some
DVDs the picture is not displayed correctly. Should this
be the case, do not connect the player via a video re-
corder.
Please Note:
When the video outputs of the DVD player are connected
to the TV set and the TV is functioning normally, please
remove all other connections between the DVD player
and the television set in order to prevent interference and
ensure the quality of the television picture.