NetApp HCI Manual page 216

Option
You need to correct cluster health issues due to
failedHealthChecks
body.
You need to pause the upgrade because the
maintenance window is closing or for another
reason.
f. Run the GET /upgrades/{upgradeId} API multiple times, as needed, until the process is complete.
During the upgrade, the
step
upgraded, the
The upgrade has finished successfully when the
finished.
Find more information
message in the response
status
indicates
value changes to NodeFinished.
Steps
1. Go to the specific KB article listed for each
issue or perform the specified remedy.
2. If a KB is specified, complete the process
described in the relevant KB article.
3. After you have resolved cluster issues,
reauthenticate if needed and click PUT
/upgrades/{upgradeId}.
4. Click Try it out.
5. Enter the upgrade ID from the previous step in
upgradeId.
6. Enter "action":"resume"
body.
{
"action": "resume"
}
7. Click Execute.
1. Reauthenticate if needed and click PUT
/upgrades/{upgradeId}.
2. Click Try it out.
3. Enter the upgrade ID from the previous step in
upgradeId.
4. Enter "action":"pause"
body.
{
"action": "pause"
}
5. Click Execute.
running
if no errors are encountered. As each node is
percent
value is
in the request
in the request
100 state
and the indicates