NetApp HCI Manual page 309

Node model
H410C
Steps
1. Find the failed DIMM by matching the slot
number/ID you noted earlier with the numbering
on the motherboard. Here are sample images
showing the DIMM slot numbers on the
motherboard:
2. Press the two retaining clips outward, and
carefully pull the DIMM up. Here is a sample
image showing the retaining clips:
3. Install the replacement DIMM correctly. When
you insert the DIMM into the slot correctly, the
two clips lock in place.
Ensure that you touch only
the rear ends of the DIMM. If

you press on other parts of
the DIMM, it might result in
damage to the hardware.
Install the node in the NetApp HCI chassis,
ensuring that the node clicks when you slide it
into place.