NetApp HCI Manual page 179

Upgrade to the latest HealthTools
Before you begin the Element storage upgrade, you should upgrade your HealthTools
suite. Upgrading HealthTools is only required if the management node and Element
software you are running is 11.1 or earlier. HealthTools are not required for performing
Element upgrades using NetApp Hybrid Cloud Control.
What you'll need
• You are running management node 11.0, 11.1 or later.
• You have upgraded your management services to at least version 2.1.326.
NetApp Hybrid Cloud Control upgrades are not available in earlier service bundle versions.
• You have downloaded the latest version of
node.

You can check the locally installed version of HealthTools by running the
healthtools -v
• To use HealthTools with dark sites, you need to do these additional steps:
◦ Download a JSON file
and rename it to metadata.json.
◦ Have the management node up and running at the dark site.
About this task
The commands in the HealthTools suite require escalated privileges to run. Either preface commands with
sudo
or escalate your user to root privileges.

The HealthTools version you use might be more up to date than the sample input and
response below.
Steps
1. Run the sfupdate-healthtools
HealthTools software.
Sample input:
sfupdate-healthtools /tmp/solidfire-healthtools-2020.03.01.09.tgz
Sample response:
HealthTools
command.
from the NetApp Support Site on a computer that is not the management node
<path
and copied the installation file to the management
to install file>
sfupdate-
command to install the new