NetApp HCI Manual page 203

Table of Contents

Advertisement

Installing mip=[10.117.114.24] nodeID=[2] (2 of 4 nodes)
Starting to move primaries.
Loading volume list
Moving primary slice=[5] away from mip[10.117.114.24] nodeID[2] ssid[7]
to new ssid[11]
...
Install of solidfire-rtfi-sodium-11.0.0.761 complete.
Removing old software
No staged builds present on nodeID=[1]
No staged builds present on nodeID=[2]
...
Starting light cluster block service check
If you are upgrading an H610S series node to Element 12.2 and the node is running a
version of Element earlier than 11.8, you will need to perform additional upgrade steps
(phase
upgrade steps (phase 2) are not required.
Upgrade Element software at dark sites using HealthTools
You can use the HealthTools suite of tools to update NetApp Element software at a dark site.
What you'll need
1. For NetApp HCI systems, go to the NetApp HCI software
go to the Element software
2. Select the correct software release and download the latest storage node image to a computer that is not
the management node.
You need the latest version of HealthTools to upgrade Element storage software.
3. Download this
JSON file
Support Site on a computer that is not the management node and rename it to metadata.json.
4. Copy the ISO file to the management node in an accessible location like /tmp.
You can do this by using, for example, SCP. When you upload the ISO file, make sure
that the name of the file does not change, otherwise later steps will fail.
Steps
1. Run the
sfupdate-healthtools
sfupdate-healthtools <path-to-healthtools-package>
2. Check the installed version:
2) for each storage node. If you are running Element 11.8 or later, the additional
download
page.
(https://library.netapp.com/ecm/ecm_get_file/ECMLP2840740) from the NetApp
command:
download
page. For SolidFire storage systems,

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HCI and is the answer not in the manual?

Table of Contents