NetApp HCI Manual page 359

details.
Configure the replacement switch
Perform the steps to configure the replacement switch. See
Steps
1. Choose from the option that applies to you:
Option
From the BIN configuration file
Mellanox configuration management
Steps
1. Fetch the BIN configuration file as shown in the
following example:
switch (config) # configuration
fetch scp://myusername@my-
server/path/to/my/<file>
2. Load the BIN configuration file you fetched in the
previous step as shown in the following example:
switch (config) # configuration
switch-to my-filename
3. Type yes
to confirm the reboot.
for details.