NetApp HCI Manual page 166

https://[management node IP address]
2. Log in to NetApp Hybrid Cloud Control by providing the NetApp HCI storage cluster administrator
credentials.
3. In the left navigation blue box, select the NetApp HCI installation.
The Hybrid Cloud Control Dashboard appears.
4. In the left navigation, select the cluster and select Storage > Volumes.
5. On the Volumes page, use the following options:
a. Filter the results by clicking the Filter icon.
b. Hide or show columns by clicking the Hide/Show icon.
c. Refresh data by clicking the Refresh icon.
d. Download a CSV file by clicking on the Download icon.
6. Monitor the Used capacity column. If Warning, Error, or Critical thresholds are reached, the color
represents the used capacity status:
a. Warning - Yellow
b. Error - Orange
c. Critical - Red
7. From the Volumes view, click the tabs to see additional details about the volumes:
a. Access Groups: You can see the volume access groups that are mapped from initiators to a collection
of volumes for secured access.
See information about
b. Accounts: You can see the user accounts, which enable clients to connect to volumes on a node.
When you create a volume, it is assigned to a specific user account.
See information about
c. Initiators: You can see the iSCSI initiator IQN or Fibre Channel WWPNs for the volume. Each IQN
added to an access group can access each volume in the group without requiring CHAP
volume access groups.
NetApp HCI user accounts.