System Settings - Agrowtek GrowControl GCX Instruction Manual

System Settings

The system settings page is where system commands are accessed and settings are con gured including:
• Controller name
• System sensor units
• Time zone
• System weather station & alerts
• Chart display mode
• Check for updates
• Enable diagnostic options
• Reboot the system
1
2
3
4
1. System Name Reference name of the controller included in email alerts.
2. Commands System commands including status, updates, shutdown and reboot.
3. Weather Station Select a global weather station if equipped.
4. Weather Alarms Enter weather station alarm set points for use by control functions.
Alarm bell icon turns RED to indicate an alarm is active.
5. About Button Opens the about dialog with system version number and revision history.
6. Time Zone Select the time zone that the system is located in.
Time is automatically updated by internet time services.
7. System Units Global units selection for sensors to report in.
8. Chart Display Chart data can be populated newest on the left or right depending on preference.
9. Debug Displays debugging information and messages in the noti cation view.
10. Sequnce Delay Sets a minimum delay between simultaneously activated outputs.
27
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
5
6
7
8
9
10