Cycle Timer - Agrowtek GrowControl GCX Instruction Manual

Cycle Timer

A cycle timer is a classic function where a device is operated in repeating off-on cycles. The cycle timer, like
all functions, can be scheduled to operate during a set time of day or can operate continuously.
Example uses:
• Cycling circulation fans
• Agitating tanks with a mixing pump
• Basic irrigation timer
1
2
3
4
1. Off Preset Time duration for the "off" period of the cycle.
2. On Preset Time duration for the "off" period of the cycle.
3. Discrete Output Select the device and output for the cycle timer to operate on.
Cycle timers only operate on discrete type outputs.
4. Preview A preview of the timer actions is shown in this eld.
5. Units Select the units for the off and on presets; seconds, minutes or hours.
Maximum time values:
Seconds 65500
Minutes 1092
Hours 18
NOTE
To ensure accurate timing, cycle timers operate locally at the GrowNET™ device. The cycle timer function will
show active when the timer is operating but will not change status based on the cycle timer. Observe the
physical output for the status of the cycle.
49
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
5