Control Setting Schedule - Agrowtek GrowControl GCX Instruction Manual

If Function True/False
To enable a function setting dependent on another function's status (instead of a physical output) select the
"If Function" mode.
1. Press the [ IF FUNCTION ... ] button in the desired on or off mode.
The Enable Mode area will expand and the drop-down menus to select a function will be displayed.
2. Select a control group.
3. Select a function.

Control Setting Schedule

Every control function setting can be scheduled by time of day and/or start/end date.
To con gure a setting to be active during a speci c time range, enable the Time Range switch.
Set a start and end time for the function to be enabled.
If a date range is to be speci ed, enable the Date Range switch.
Set a start and end date for the setting to be enabled.
1
2
3
1. Time Range Enable the switch to set a time range for the setting to be enabled.
2. Date Range Enable the switch to set a date range for the setting to be enabled.
3. First Day First date that the setting will be enabled (date range mode.)
4. Last Day Last date that the setting will be enabled (date range mode.)
5. Start Time Time of day that the setting will be enabled (time range mode.)
5. End Time Time of day that the setting will be disabled (time range mode.)
45
3
5
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
2 1
6
4