System Settings - Agrowtek GrowControl GCX Instruction Manual

System Settings

The system settings page is where system commands are accessed and settings are con gured including:
• Controller name
• System units
• Time zone
• System weather station & alerts
• Chart display mode
• Check for system updates
• Perform device firmware updates
• Enable diagnostic options
• Reboot or shutdown the system
1
2
3
4
1. System Name Reference name of the controller included in email alerts.
2. Commands System commands including status, updates, shutdown and reboot.
3. Display Timer Time-out for display power; turns o display automatically. Set to 0 to disable.
4. Advanced Options Settings for diagnostics and repair; contact service.
5. Reset Devices Functions for resetting device addresses when a PC with LX1 is not available.
6. About Button Opens the about dialog with system version number and revision history.
7. System Units Global units selection for sensors to report in.
System Options Sync Tabs: Workspace selection synchronized across all tabs.
8. Report Increment Interval to automaticall change through reports on home screen.
9. Weather Alarms Settings for global weather alarm conditions used by control functions.
10. Sequnce Delay Sets a minimum delay between simultaneously activated outputs.
33
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
6
7
8
9
10