Agrowtek GrowControl GCX Instruction Manual page 65

Nutrient Pumps
The nutrient pumps are assigned by creating a list of dosing pumps; the corresponding recipe part will be
shown in parenthesis. Up to 24 nutrient pumps may be added to the function setting.
To create a list of pumps, use the Add Pump button (6), then modify the pump device (1) and pump head (2)
selection. Add and edit additional pumps until all of the pumps have been added. Adjust the order of pumps
to match the recipe order if necessary by using the sort buttongs (4) to move the selected pump up or down
in the list.
1
2
3
1. Dosing Pump Device
2. Pump Head
3. Pump List
4. Sort Buttons
5. Delete Pump
6. Add Pump
TIP
To edit the pump assignment, select the pump then modify the pump device or pump head, and save the
settings.
65
Select the device that has the desired chemical pump head on it.
Select the pump head on the pump device.
List of dosing pumps by pump name (description.)
Corresponding recipe part name is shown in parenthesis.
Use the sort buttons to move the selected pump up or down in the list.
Sort buttons help match the pump order to the recipe order.
Deletes the selected pump from the pump list.
Adds a new pump to the pump list.
© Agrowtek Inc. | www.agrowtek.com | Technology to Help You Grow™
4 5 6