Extreme Networks ExtremeWireless AP560h Installation Manual page 33

Install the Plastic Service Panels on the Access Point
2. Torque the screws to 13 in-lbs.
Figure 13: Plastic service panel base attachment holes on AP560h access point
Callout
A
3. Place the service panel top over the service panel base and lock it into place using the captive screw.
Figure 14: Plastic service panel top
Callout
A
4. Tighten the captive screw to 4.5 in-lbs by hand.
Description
Plastic service panel base attachment holes on AP560h access
point
Description
Plastic service panel top captive screw
ExtremeWireless™ AP560h Access Point 33