Extreme Networks ExtremeWireless AP560h Installation Manual page 18

Install the Access Point Using MBO-ART02 Articulating
Mounting Bracket
2. Attach the MBO-ART02 to the access point using two M6 hex-head screws.
Use the mounting holes shown in
access point.
Figure 4: Attach the MBO-ART02 bracket to the AP560h access point
3. Align the mounting holes on the MBO-ART02 articulating mounting bracket against the holes on the
wall and attach the bracket using four M6 hex-head screws.
18 ExtremeWireless™ AP560h Access Point
Figure 4 to mount the MBO-ART02 bracket onto the AP560h
Install the Access Point