Extreme Networks ExtremeWireless AP560h Installation Manual page 25

Install the Access Point
3. Attach both the cable clamps to the WS-MBO-POLE01 bracket.
Open the cable clamp by turning a flat bladed screwdriver counterclockwise. Then insert the non-
clamp end into the pole bracket through the holes.
4. Put the metal band around the pole and attach the WS-MBO-POLE01 bracket to the pole.
Figure 8: Attaching the cable clamps to the pole
Install the Access Point on a Pole Using MBO-ART02
Articulating Mounting Bracket and POLE01 Bracket
ExtremeWireless™ AP560h Access Point 25