System - DPS Telecom NetGuardian 480 G3 User Manual

30
10.1

System

From the Provisioning > System menu, you will configure and edit the global system, call, T/Mon and control
settings for the NetGuardian.
Name
Location
Contact
Sound on COS
Disable DCP, DCP over
LAN / Serial
DCP Unit ID
DCP Unit Protocol
DCP over LAN port
LAN Protocol
Expansions
Get History
Get Alarm Log
Erase History
The Provisioning > System menu
Global System Settings
A name for this NetGuardian unit. {Optional field)
The location of this NetGuardian unit. {Optional field)
Contact telephone number for the person responsible for this NetGuardian unit.
{Optional field)
Checking this box enables Sound on COS when viewing the Alarms, Sensors, Ping
Targets, or System Alarms page under the Monitor menu.
DCP Responder Settings (For use with T/Mon)
Select one of these 3 options to send DCP protocol over LAN, serial, or
disable DCP completely.
User-definable ID number for the target unit (DCP Address).
Drop-down menu of available protocols for use with DCP Address.
Enter the DCP port for the target unit. (UDP/TCP port)
Drop-down menu of available protocols for use over LAN.
Select the number of expansion units connected to the NetGuardian.
System Controls
Download a log of all configured analog and sensor values.
Download a log of the device's recent alarm history.
Erase the log of all configured analog and sensor values.