Quick Turn Up; How To Send Email Notifications - DPS Telecom NetGuardian 480 G3 User Manual

25
9

Quick Turn Up

The next sections of this manual will walk you through some of the most common tasks for using the NetGuardian.
You will learn how to send email notifications, and send SNMP traps to your alarm master - all using the Web
browser. For details on entering your settings into each Web browser menu, the section "Provisioning Menu Field
Descriptions" section.
9.1

How to Send Email Notifications

1. Click on the Notifications button in the Provisioning menu. You can setup as many as 8 different notifications.
Begin the setup "wizard" by clicking Edit for a notification number. In this example, we'll setup Notification 1 to send
emails.
2. At the Notification Setting screen, use the drop down box to set what events to use for this notification. Now,
select the Send Email button and click Save and Next.
3. At the Email Notification screen, you'll enter your email server settings. Enter the IP address or Host Name of
your email server. Note: if using Host Name, make sure that DNS Servers settings are configured. Enter the Port
Number (usually 25) and the "To" Email Address of the technician that will receive these emails. If authentication
is required, chose the type and fill in the necessary fields. Click Next.
4. At the Schedule screen, you'll select the exact days/times you want to receive email notifications. You can set
two schedules per notification. For example, you may want to receive notifications at certain times during the week,
and at different hours on the weekend. Use the check boxes to select the days of the week, and select the time
from the drop down menus. Click Finish. To try a test notification, click the Test button (See next step.)