DPS Telecom NetGuardian 480 G3 User Manual page 51

Modbus Poll Delay Delay between Modbus polls in milliseconds.
Modbus Poll
Time duration before the Modbus repsonse time fails in seconds.
Timeout
Send Notification
This option is used to send a notification whenever a Modbus register is polled.
of every register
If the poll delay is too low this may cause some notifications to be lost.
update
ID Modbus device ID.
Device Type Modbus device type.
Connection TCP or Serial connection.
Host Name or IP IP used for polling when using TCP Modbus. Unused otherwise.
TCP Port or Serial TCP or physical serial port used when performing Modbus polling.
Port
Modbus Address Address of Modbus device.
Device Register Amount to offset "Modbus Address" by.
Offset
Threshold Mode This will configure different threshold values based on Modbus register values.
Threshold mode options:
thresholds will be used
will be triggered based on the value of a status register.
will be triggered based on the value of a point reference.
Global Settings
Device Settings
1) "standard thresholds" - default threshold setting. Only one value of
2) "Idle/Running Thresholds: Status Register" - device idle thresholds
3) "Idle/Running Thresholds: Point Reference" - device idle thresholds
47