Enable Vcc_Hpc Jumper (X48); I2C0 Header (X50); I2C1 Header (X53); Table 24: Enable Vcc_Hpc Jumper (X48) - Kontron COM-HPC User Manual

Enable VCC_HPC Jumper (X48)

Figure 27: Enable VCC_HPC Jumper (X48)

Table 24: Enable VCC_HPC Jumper (X48)

Jumper Position
1-2

I2C0 Header (X50)

The I2C Interface supports clock from 127Hz to 400kHz (limited by on board devices and capacitive loading) and can
be configured in Setup.
Figure 28: I2C0 Header, 4-pin (X50)
1

Table 25: I2C0 Header (X50)

Pin
1
2
3
4

I2C1 Header (X53)

The I2C Interface supports clock from 127Hz to 400kHz (limited by on board devices and capacitive loading) and can
be configured in Setup.
Figure 29: I2C1 Header, 3-pin (X53)
1

Table 26: I2C1 Header (X53)

Pin
1
2
www.kontron.com
Description
Enable VCC_HPC
Description
COMH_I2C0_DAT
COMH_I2C0_CLK
COMH_I2C0_ALERT#
GND
Description
COMH_I2C1_DAT
COMH_I2C1_CLK
COM-HPC Server Evaluation Carrier
- Rev. 1.0
// 36