Electrical Safety - GE LOGIC C2 Series Technical Publication

Safety Information
Mechanical safety (continued)
NOTE:

Electrical safety

Safe practices
WARNING
2-16
Special care should be taken when transporting the Ultrasound
system in a vehicle:
• Before transporting, place the Ultrasound system in its
special storage case.
• Ensure that the Ultrasound system is firmly secured while
inside the vehicle.
• Secure Ultrasound system with straps or as directed
otherwise to prevent motion during transport.
• Prevent vibration damage by driving cautiously. Avoid
unpaved roads, excessive speeds, and erratic stops or
starts.
Follow these guidelines to minimize shock hazards whenever
you are using the Ultrasound System:
• To minimize shock hazard, the equipment chassis must be
connected to an electrical ground.
• The Ultrasound System is equipped with a three-conductor
AC power cable. This must be plugged into an approved
electrical outlet with safety ground.
• The power outlet used for this equipment should not be
shared with other types of equipment.
• Both the Ultrasound System power cable and the power
connector must meet international electrical standards
Connecting a Ultrasound System to the wrong voltage level will
most likely destroy it.
Ultrasound System
–
Common Service Information
Direction 5444964-100 English Rev. 5