Proc 103 Word 1 (Screen D-7) Is Used To Define The Network - Avaya 6424D+M User Manual

Appendix D: Applications and Switch Administration
Page D-20
ENHANCED MODE - PROCEDURE:
TRUNK GROUP TRANSLATION
1. Trunk Group: [60]
DIAL ACCESS CODE/TRUNK ID CODE
2. Digit 1: [1]
3. Digit 2: [6]
4. Digit 3: [0]
5. Digit 4: [-]
6. Trunk Type: [41]
7. Dial Access Restriction: [-]
8. Personal CO Line Appearance: [-]
9. Public Network Access/Egress: [-]
DISPLAY ONLY
10. Signaling Type: [---]
Generic 2 Trunk Group Administration

PROC 103 Word 1 (Screen D-7) is used to define the network

functionality of Trunk Group 60 and should be populated as
follows:
Field 1 (Trunk Group): 60.
Fields 3 and 4 (Network Trunk Usage): 1,0. This indicates
a network to main trunk usage.
Field 5 (AAR Trunk Access): 1. This allows incoming
SDN/SDDN calls to have access to AAR in the switch.
Field 9 (AAR dialing prefix): 8. The AAR Feature Access
Code (FAC) is 8 and will be the access code for
SDN/SDDN calls.
Note: With World Class Routing on the Generic 2.2, the
appearance of these forms will alter slightly. Refer to
the Generic 2.2 administration manual for the proper
procedures.
DEFINITY Communications System
DEFINITY High Speed Link
100, WORD:1
SCREEN D-6
User´s Guide