Change A Stored Number - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
Press NEXT/NO or BACK until the HSL displays the first
6
digit of the number you are storing.
Press ENTER/YES to select the first digit. The cursor moves
7
to the right.
Press NEXT/NO or BACK until the HSL displays the second
8
digit of the number you are storing.
Continue this procedure until the number you are storing is
9
complete.
Note: To back up the cursor while entering a number, do
the following:
Press ENTER/YES when the cursor is under a
1
blank. The cursor will move to the first digit of
the number.
Press NEXT/NO or BACK to step through the
2
digits until a blank is displayed, or press
ENTER/YES to move the cursor right until the
cursor is under a blank.
Press ENTER/YES to move the cursor to the right, and
10
NEXT/NO or BACK until the HSL displays the letter E.
Press ENTER/YES to store the number in memory location
11
M0. The HSL returns to the HOME screen after the number is
stored.

Change a Stored Number

To change a stored a number, do the following:
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES to select CALL CONTROL? The HSL will
2
display either DIAL?, ANSWER CALL?, or END CALL?
Press NEXT/NO . The HSL displays STORE NUMBER?
3
Press ENTER/YES . The HSL displays the number stored in
4
memory location M0. Press NEXT/NO or BACK until the
HSL displays the number to be changed.
Press ENTER/YES to select the number you would like to
5
change. The HSL displays the stored number with the cursor
under the first digit of the number.
Press ENTER/YES to move the cursor to the first digit to be
6
changed.
Press NEXT/NO or BACK to change the digit.
7
Press ENTER/YES to move the cursor to the next digit to be
8
changed.
Chapter 3: Using the Front Panel
Page 3-23