Dial A Call; Answer A Call - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide

Dial a Call

To dial a stored number, the HSL must be idle and the data
terminal equipment must be ready (V.35 DTR interface lead ON)
or the DTR LEAD option must be set to IGNORE.
Procedure: Dialing a Call
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES to enter the call control mode. If idle, the
2
HSL displays DIAL?
Press ENTER/YES to view the stored numbers.
3
If a number stored in the memory location is 9 digits or
less, the HSL displays DIAL: and the number, for
example DIAL:5551414?
If the number stored in the memory location is more than
9 digits, the HSL displays only the number, for example
19085551414?
If the memory location is empty, the HSL displays
DIAL:?
Press NEXT/NO or BACK to step through the four stored
4
numbers.
Press ENTER/YES when the desired number is displayed.
5
The HSL dials the number displayed, and then returns to the
HOME screen.
Note: If the HSL is not idle or the data terminal equipment
is not ready when ENTER/YES is pressed, the HSL
displays the message DENIED, followed by the
HOME screen.

Answer a Call

The HSL allows you to answer a call from the front panel.
From the HOME screen, press NEXT/NO or BACK until the
1
HSL displays CALL CONTROL?
Press ENTER/YES to select CALL CONTROL? when there is
2
an incoming call. The HSL displays ANSWER CALL?
Press ENTER/YES while the HSL displays ANSWER CALL?
3
The HSL answers the call and displays the HOME screen.
Note: There must be an incoming call and either the DTR
lead on the V.35 interface must be ON or the DTR
LEAD option must be set to IGNORE. Otherwise,
the HSL displays the DENIED message, and then
returns to the HOME screen.
Chapter 3: Using the Front Panel
Page 3-21