Avaya 6424D+M User Manual page 115

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide
Appendix D: Applications and Switch Administration
Fields 3 - 9. These fields identify the port of one endpoint
in the DSC.
Field 8 (I-Channel Assignment). If this port is connected
to the HSL, a "0" should be entered to indicate that DCP I-
channel 1 will be used to transmit the data. If this port is
connected to the DS0, this field should be left blank.
Fields 10 - 14. These fields identify the port of the other
DSC endpoint.
Field 15 (I-Channel Assignment). See Field 8.
With this administration, the DSC on the Generic 2 with the FEP is
established. Once the same procedures are performed on the
other Generic 2, a permanent connection will be created allowing
the CC behind the Generic to communicate with the FEP. To
establish a DSC with the access endpoint, the same procedures
can be used. However, in order for the HSL to communicate
properly with the network and the DSU, the signaling must be
disabled. This is done by entering a "0" in PROC 116 Word 1 Field
8. Once the signaling is disabled, the DSC can be established
allowing the other CC to communicate with the FEP.
Page D-41