Menus; View Option Values - Avaya 6424D+M User Manual

DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide

Menus

Option Displays
DIAL
SPEED
DUPLEX
DATA INVERT
ANS
PERM CONN
LOOPBACK
DSR
DTR
The HSL displays the state of the DTR input lead when the DTR
LEAD option is set to NORMAL. The oval is displayed,
independent of the state of the DTR input lead, when the option is
set to IGNORE.
The state of the RTS input lead is displayed when the DUPLEX
option is set to HALF. The oval is displayed, independent of the
state of the RTS input lead, when the option is set to FULL, or
speed is set to 64 Kbps.
The following sections provide information and procedures for
using the menus.
View Options
The purpose of the View Options screen is for viewing the current
settings of the dial method and all options. Table 3-3 below
illustrates the possible settings for the options. The factory default
settings are in bold print. Refer to Chapter 4, ''Options'' for more
information on these options.
TABLE 3-3

View Option Values

Possible Values
RS-366, RS-232, DTR, HOTLINE, MANUAL
56KBPS, 64KBPS
FULL, HALF
ON, OFF
AUTO, MANUAL
YES, NO
AT&T, V.54
NORMAL, ON
NORMAL, IGNORE
Chapter 3: Using the Front Panel
Page 3-5