Ending A Call; V.35 Dtr Lead; Rs-232 - Avaya 6424D+M User Manual

Chapter 5: Call Control Operation
Page 5-4

ENDING A CALL

Front Panel

V.35 DTR Lead

RS-232

Calls can be disconnected using the front panel, the V.35 interface,
or the RS-232 interface. A call cannot be disconnected when the
Permanent Connection option is set to YES or when the HSL is in
a test mode activated by the switch.
Procedure: Ending a call from the front panel
Press NEXT/NO until the HSL displays CALL CONTROL?
1
Press ENTER/YES . If there is a call in progress, the HSL
2
displays END CALL?
Press ENTER/YES when the HSL displays END CALL?
3
The HSL disconnects the call and displays the HOME screen.
With the DTR lead option set to NORMAL, the data equipment
turns OFF the V.35 DTR lead.
The user sends an ATH command to end the call.
DEFINITY Communications System
DEFINITY High Speed Link
User´s Guide