Additional Information; Product Overview; Scope Of Delivery; System Structure - Festo CMMT-ST-C8-1C Series Manual

Product overview

3

Additional information

– Contact the regional Festo contact if you have technical problems è www.festo.com.
– Accessories and spare parts è www.festo.com/catalogue.
Firmware, software or configuration files è www.festo.com/sp.
4 Product overview
4.1

Scope of delivery

Component
Servo drive CMMT-ST-...
Assortment of plugs NEKM-C-22
H-rail clamp (premounted)
Operating instructions CMMT-ST-...
Tab. 7: Scope of delivery
Below are some examples of the available accessories:
– Patch cable for linkage of the RTE interface
Up-to-date information on the accessories è www.festo.com/catalogue.
4.2

System structure

The servo drive CMMT-ST is a 1-axis servo drive for controlling a stepper motor or an EC motor with
connected mechanisms, e.g. a Festo axis. The device is controlled by a higher-level controller using
the bus protocol EtherCAT, EtherNet/IP or PROFINET, depending on the product version, via a real-time
Ethernet interface.
The device can be parameterised via a PC using either the real-time Ethernet interface or the separate
standard Ethernet interface.
The device is an extra-low-voltage controller. The load and logic power supply must be provided by a
PELV fixed power supply.
10
Number
1
1
1
1
Festo — CMMT-ST-C8-1C-...-S0 — 2021-04b