Product Labelling - Festo CMMT-ST-C8-1C Series Manual

About this document
Characteristic
Bus protocol/control
Safety function
Tab. 2: Product variants CMMT-ST-... (e.g. CMMT-ST-C8-1C-EC-S0)
This documentation refers to the following version:
– Servo drive CMMT-ST-...-S0, revision 1 and higher, see product labelling.
This is the first available revision.
• For later revisions of the product, check whether updated documentation is available è 3 Addi-
tional information.
1.4

Product labelling

• Observe the specifications on the product.
The product labelling is located on the right side of the device. The product labelling enables identifi-
cation of the product and shows the following information:
Product labelling (example)
CMMT-ST-C8-1C-EC-S0
8084005 MM-YYYY:XX SNM Rev 01SNW
Main input: 1x 24 ... 48 V DC 8 A
Motor out: 4x 0 ... input V AC 0 ... 20 kHz 8 A
300 W
T : max. 50 °C
AMB
IP20 PD2
MAC-ID: XF1 IN XX-XX-XX-XX-XX-XX
R-R-FTO-KC-2018-1092
01/205/5696.00/19
Data matrix code, 123456789AB
Festo SE & Co. KG
6
Order code
EC-
EP-
PN-
S0
Meaning
Order code
Part number, serial number (manufacturing
month, manufacturing year, plant number),
revision
Technical data for the power supply (PELV fixed
power supply)
Technical data for the motor output (output
RMS
voltage, output frequency, nominal current,
nominal output power)
Ambient temperature (T
Degree of protection, pollution degree
First MAC address of the device for RTE com-
munication XF1 IN, also represented as a bar-
code
KC mark certificate (test mark for Korea)
TÜV certificate number
Product key as a data matrix code and an 11-
character alphanumeric code
Manufacturer
Type
EtherCAT
EtherNet/IP
PROFINET
Basic safety
AMB
Festo — CMMT-ST-C8-1C-...-S0 — 2021-04b
)