Additional Information; Service; Product Overview; Scope Of Delivery - Festo CMMT-ST-C8-1C-...-S0 Series Original Instructions Manual

Additional information

The product is a safety device in accordance with the Machinery Directive. For details of the safety-ori-
ented standards and test values that the product complies with and fulfils, see è Description Safety
sub-function, Technical data, safety engineering. Please note that compliance with the named stand-
ards is limited to the CMMT-ST-...-S0.
Certain configurations of the product have been certified by Underwriters Laboratories Inc. (UL) for the
USA and Canada.
These configurations bear the following mark:
Fig. 2
cUL Listed Mark for Canada and the United States.
During installation and operation of this product, comply with all safety requirements, statutes, codes,
rules and standards relevant for the product, such as the National Electrical Code (USA), Canadian
Electrical Code (Canada) and regulations of the US federal agency OSHA. When selecting the circuit
breaker, comply with the maximum permissible electrical protection for UL.
3 Additional information
– Accessories è www.festo.com/catalogue.
– Spare parts è www.festo.com/spareparts.
– All available documents for the product and current versions of the firmware and commissioning
software è www.festo.com/sp.
4

Service

Contact your regional Festo contact person if you have technical questions è www.festo.com.
5

Product overview

5.1

Scope of delivery

Component
Servo drive CMMT-ST-...
Assortment of plugs NEKM-C-22
H-rail clamp (premounted)
Instruction manual CMMT-ST-...
Tab. 7 Scope of delivery
Below are some examples of the available accessories:
– Patch cable for linkage of the RTE interface
10
Number
1
1
1
1
Festo — CMMT-ST-C8-1C-...-S0 — 2019-01