Table of Contents
Advertisement
Insert the hook piece through the slots in the panel cradle base.
Inspect the entire machine for loose or unsecured items.
4.3.2 Lifting
a)
See serial label and Technical Parameters section in this manual for specific machine weight and
total weight of the machine;
b)
Place the boom in the stowed position;
c)
Remove all loose items from the machine;
d)
Properly adjust the rigging to prevent damage to the machine and so the machine remains level.
4.3.3 Securing the chassis
a)
Using chains of ample load capacity;
b)
Using a minimum of 4 chains;
c)
Adjust the rigging to prevent damage to the chains.
4.3.4 Securing the platform
a)
Be sure the boom and the platform are in stowed position;
b)
Use the straps between the platform rotator (see Figure below) and platform base to secure the
platform;
c)
Use nylon tape to secure the platform. Do not use excessive downward force when securing the
boom section.
Figure 4-5 Lifting and securing instructions
4-9
Hide quick links:
Advertisement
Table of Contents
