Table of Contents
Advertisement
Tip-over hazard
Manual force cannot be greater than specification when operating, otherwise may cause tipping over.
Model
ZA14J
a)
Do not place or attach fixed or overhanging loads to any part of this machine;
b)
Do not place ladders or scaffolds in the platform or against any part of this machine;
c)
Do not transport tools and materials unless they are evenly distributed and can be safely handled by
person(s) in the platform;
d)
Do not use the machine on a moving or mobile surface or vehicle;
e)
Be sure the tires are in good condition and the lug nuts tightened, besides the tightening torque
should be 300N/m (20.2 lb/ft);
f） Do not drive the machine on a slope that exceeds the maximum uphill, downhill or side slope rating
of the machine. Slope rating applies only to machines in the stowed position.
Maximum slope rating, stowed position
Platform uphill
Platform downhill
Side slope
Note: Slope rating is subject to ground conditions with one person in the platform and adequate
traction. Additional platform weight may reduce slope rating.
Table 1-4 Maximum allowable manual force
Manual force
400 N/90 lbs force
Table 1-5 Maximum slope rating, stowed position
Maximum occupants
2
45% (24°)
25% (14°)
25% (14°)
1-9
Hide quick links:
Advertisement
Table of Contents
