Table of Contents
Advertisement
switch in the depressed position, DO NOT OPERATE MACHINE;
d)
If an engine malfunction causes a unscheduled shutdown, determine the cause and correct it before
restarting the engine;
e)
Consult ZOOMLION customer service to know more about the operation under abnormal
conditions.
4.2.1.1 Engine start
Machine with diesel engines. After turning on ignition, operation must wait until
glow plug indicator light goes out before cranking engine.
a)
Turn key of SELECT switch to GROUND;
b)
Pull the Power/Emergency Stop switch to ON;
c)
Push the Engine Start switch until engine starts;
d)
After engine has had sufficient time to warm up, push in the Power/Emergency
Stop switch and shut engine off;
e)
Turn Platform/Ground Select switch to GROUND;
f)
From platform position Power/Emergency Stop switch to ON;
g)
Push the Engine Start switch to the forward position until engine starts.
Allow engine to warm-up for a few minutes at low speed before applying any load.
If engine fails to start promptly, do not crank for an extended period. If engine fails to start one again,
allow starter to 'Cool Off' for 2-3 minutes. If engine fails after several attempts, refer to engine
4-2
Hide quick links:
Advertisement
Table of Contents
