Table of Contents
Advertisement
SECTION 4 OPERATION INSTRUCTION
4.1 General
An operator must not operate the machine, only if:
He has learned and practiced the principles of safe machine operation contained in this
operational manual.
a)
Avoid hazardous situations;
b)
Perform a pre-operation inspection at all times;
c)
Implement functional test before operating the machine at all times;
d)
Inspect job site;
e)
Only use the machine as it was intended.
Fundamentals：
The Operating Instructions section provides instructions for each aspect of machine operation. It is the
operator's responsibility to follow all the safety rules and instructions in the operator's, safety and
responsibilities manuals.
Using the machine for anything other than lifting personnel, along with their tools and materials, to an
aerial work site is unsafe and dangerous.
Only trained and authorized personnel should be permitted to operate a machine. If more than one
operator is expected to use a machine at different times in the same work shift, they must all be
qualified operators and are all expected to follow all safety rules and instructions in the operator's safety
and responsibilities manuals. That means every new operator should perform a pre-operation inspection,
function tests, and a workplace inspection before using the machine.
4.2 Machine Operation
4.2.1 Engine operation
Note:
a)
Initial starting should always be performed from the Ground Control
station;
b)
When operating a machine at high altitudes, a decrease in machine
performance may occur due to a decrease in air density. When operating
a machine at high ambient temperatures, a decrease in machine
performance and increase in engine coolant temperature may occur;
c)
Foot switch must be released (up) position before starter will operate. If starter operates with foot
4-1
Hide quick links:
Advertisement
Table of Contents
