Zoomlion ZA14J Operation And Safety Manual page 40

Before driving, locate the blue/yellow orientation arrows on both the chassis and the platform controls.
Move the drive controls in a direction matching the directional arrows.
7) Drive/Steer controller
Provide drive/steer controls.
Push forward to drive forward, pull back to drive in reverse.
Steering is accomplished via a thumb-activated rocker switch on the end of the
steer handle.
8) Main boom telescope switch
Provide extension and retraction of the main boom.
9) Jib lift switch
Provide platform rotate controls.
10) Platform rotates switch
Provide platform rotate controls.
11) Work light switch
This switch operates the chassis lights if machine is so equipped.
12) Function speed control
This control could adjust the main boom telescoping, tower boom or jib lifting, and
the speed of platform rotation. Function speed controls switch the speed of drive,
swing and lift between turtle and rabbit modes only.
Turning the knob all the way counterclockwise until it clicks to put drive, main lift
and swing into creep mode.
13) Main lift/swing controller
Provides main boom lift and platform swing. Push forward to lift up, pull
backward to lower.
Move left to swing clockwise, move right to swing counterclockwise.
2-12