Explosion and fire hazards
Do not operate the machine or charge the battery in hazardous locations or locations where potentially
flammable or explosive gases or particles may be present.
Damaged machine hazard
a)
Do not use a damaged or malfunctioning machine. Conduct a thorough pre-operation inspection of
the machine and test all functions before each work shift;
b)
Immediately tag and remove from service a damaged or malfunctioning machine;
c)
Be sure all maintenance had been performed as specified in this manual and the appropriate
Zoomlion service manual;
d)
Be sure all decals are in place and legible;
e)
Be sure operator's, safety, and responsibilities manuals are complete, legible, and in the storage
container located on the machine.
Component damaged hazard
Do not charge the battery with a charger greater than 12V.
Do not use the machine as a ground for welding.
1-13