52/123
Mounting, dismounting and electrical installation
10.2.3
XMQ1
10.3
Mounting
10.4
Dismounting
10.4.1
Dismounting steps
Bosch Rexroth AG R911392532_Edition 01
IndraDrive X Drive Controllers Power Sections XCS1, XMD1,
Fig. 10-6:
Dimensional drawing XMQ1-WQ001
Observe the minimum distances specified in the dimensional drawings. See
chapter 10.2 "Housing dimensions" on page
WARNING
Before working on live parts: De-energize installation and secure power
switch against unintentional or unauthorized re-energization.
Wait at least 30 minutes after switching off the supply voltages to allow
discharging.
Check whether voltage has fallen below 50 V before touching live parts!
Observe the discharge time before you start dismounting the device.
50.
Lethal electric shock by live parts with more
than 50 V!
XMQ1